地址：河北省泊頭市道東街88号
電話：0317-8185077
0317-8263980
0317-8223128
傳真：0317-8265584
e-mail：hbydby@wadir.com.cn

技術支持

你所在位置：首頁 -  - 客戶服務 - 技術支持 
螺杆泵的裝配流程 screw pump assembly process
發布時間：2014-11-20 8:36:49 點擊次數：

 ①螺杆泵裝配前用煤油或者汽油清洗全部零件，去掉氧化皮和型砂。(1) with kerosene or gasoline cleaning all parts before assembly, remove scale and sand.

②将軸承裝在主動螺杆上，并用圓螺母鎖緊。(2) the bearing is installed on the active screw, with a round nut lock.
③将卸壓套裝在軸承體内，再穿入主動螺杆。
(3) the unloading suits in the bearing, and then through the active screw.
④将泵套裝入泵體中。(4) the pump set into the pump body.
⑤将軸承體、卸壓套、主動、從動螺杆一起裝入泵套與泵體中。
(5) the bearing body, unloading, driving and driven screw together into the pump set and pump body.
⑥将主動襯套、從杆襯套、止推墊裝入泵套與主、從螺杆上。
6 will take the initiative to bushing, from stem bushing, thrust pad loading pump sets with the lord, from the screw.
⑦将後蓋裝入泵體上。all landowners will back cover load on the pump body.
⑧從主杆螺杆伸出端依次裝入機械密封、密封壓蓋。was out from the main pole screw end into the mechanical seal, seal gland in turn.
⑨将安全閥組裝在泵體上部。the relief valve assembly pet-name ruby to the pump body upper part.
安全閥的裝配:the relief valve assembly:
①将閥座裝入泵體内，并用螺釘固定。(1) the seat into the pump body and screw fixation.
②将調節杆旋入閥後蓋。(2) to regulate stem screwing in the back cover.
③依次講閥瓣、彈簧、彈簧座裝入閥體，再将閥後蓋與閥體連接好，裝螺母防護帽。(3) speak in turn into the valve body, disc, spring, spring seat and the back cover and body connection is good, protective  cap nut.
④裝螺杆泵閥前端蓋。before the valve cover